Manitowoc SN12 Specifications download pdf (Page 26)

Maintenance Section 4

4-10

Part Number 000005544 12/09

21. While components are soaking clean all foodzone

surfaces of the bin. Rinse all areas thoroughly with

clean water.

22. .Mix a solution of sanitizer and warm water.

23. Use 1/2 of the sanitizer/water solution to sanitize all

removed components. Use a cloth or sponge to

liberally apply the solution to all surfaces of the

removed parts or soak the removed parts in the

sanitizer/water solution. Do not rinse parts after

sanitizing.

24. Use 1/2 of the sanitizer/water solution to sanitize the

dispenser bin, water trough and delivery spout. Use

a cloth or sponge to liberally apply the solution. Do

not rinse the sanitized areas.

25. Reinstall the removed parts, restore water and

power supply and test run the ice machine.

NOTE: Disconnecting and reconnecting the power

supply activated a 15 minute time delay. This delay

period can not be over ridden. The delay period will start

when power is restored and the ice machine starts after

the 15 minute delay period expires.

CLEANING THE CONDENSER

Air-Cooled Condenser

A dirty condenser restricts airflow, resulting in

excessively high operating temperatures. This reduces

ice production and shortens component life. Clean the

condenser at least every six months. Follow the steps

below.

1. The washable filter is designed to catch dust, dirt,

lint and grease. This helps keep the condenser

clean. Clean the filter with a mild soap and water

solution.

2. Clean the outside of the condenser with a soft brush

or a vacuum with a brush attachment. Clean from

top to bottom, not side to side. Be careful not to

bend the condenser fins.

3. Shine a flashlight through the condenser to check

for dirt between the fins. If dirt remains:

A. Blow compressed air through the condenser fins

from the inside. Be careful not to bend the fan

blades.

B. Use a commercial condenser coil cleaner.

Follow the directions and cautions supplied with

the cleaner.

4. Carefully wipe off the fan blades and motor with a

soft cloth. Do not bend the fan blades. If the fan

blades are excessively dirty, wash with warm, soapy

water and rinse thoroughly.

Solution Type Water Mixed With

Sanitizer 6 gal. (23 l) 4 oz (120 ml) sanitizer

Do Not Allow

Solutions To Drain

Through Center Hole

Warning

Disconnect electric power to the ice machine and

the remote condenser at the electric service switch

before cleaning the condenser.

Caution

The condenser fins are sharp. Use care when

cleaning them.

Caution

If you are cleaning the condenser fan blades with

water, cover the fan motor to prevent water

damage.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Manitowoc SN12 Specifications Page 26

Comments to this Manuals

Related products and manuals for Ice cube makers Manitowoc SN12