Manitowoc SN12 Specifications download pdf (Page 16)

Ice Machine Operation Section 3

3-4

Part Number 000005544 12/09

Removal from Service/Winterization

GENERAL

Special precautions must be taken if the ice machine

head section is to be removed from service for an

extended period of time or exposed to ambient

temperatures of 32°F (0°C) or below.

Follow the procedure below.

1. Disconnect the electrical power at the circuit breaker

or the electric service switch.

2. Turn off the water supply.

3. Disconnect and drain the incoming ice-making water

line at the rear of the ice machine.

4. Disconnect drain tubing (from the inlet to dump

valve) and drain water into container and discard.

5. Make sure water is not trapped in any of the water

lines, drain lines, distribution tubes, etc.

Caution

If water is allowed to remain in the ice machine in

freezing temperatures, severe damage to some

components could result. Damage of this nature is

not covered by the warranty.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

Manitowoc SN12 Specifications Page 16