Manitowoc MULTIPLEX 11M Specifications download pdf (Page 80)

80 Part Number STH12 9/10

PGM Switch

• Used to enter and exit programming modes.

• Press PGM Switch F000 will display

• Press and hold Carb A switch — Display will

indicate Water Bath Temperature

• Press and hold Circ A switch — Display will

indicate Discharge Temperature

• Press and hold Circ B switch — Display will

indicate Suction Temperature

• Press PGM Switch P000 will display

• Press and hold Carb A switch — Display will

indicate Water Pressure

• Press and hold Carb B switch — Display will

indicate CO2 Pressure

Press and hold PGM switch for 3 seconds to save

settings and exit program mode.

Program Mode 1

To enter, press and hold switch for 3 seconds.

• 0001 will display indicating Mode 1

• Wait 3 seconds — C000 will display

• Press and hold Carb A switch — Display will

indicate one of the following:

• CA00 — Low and High Probes are open

(carbonator motor is energized)

• CA11 — Low and High Probes are closed

(carbonator motor is de-energized)

• CA01 — Low Probe closed (Motor will still be

on)

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 235 236

No comments

Manitowoc MULTIPLEX 11M Specifications Page 80