Manitowoc QD1092N Specifications download pdf (Page 13)

Section 2 Installation Instructions

Part Number 000001759 2-3

Location of Ice Machine

The location selected for the ice machine must meet the

following criteria. If any of these criteria are not met,

select another location.

• The location must be free of airborne and other

contaminants.

• The air temperature must be at least 1.6°C, but must

not exceed 43.4°C.

• The location must not be near heat-generating

equipment or in direct sunlight.

• The location must not obstruct air flow through or

around the ice machine. Refer to the chart below for

clearance requirements.

Stacking Two Ice Machines on a Single

Storage Bin

A stacking kit is required for stacking two ice machines.

Installation instructions are supplied with the stacking kit.

Ice Machine Heat of Rejection

Ice machines, like other refrigeration equipment, reject

heat through the condenser. It is helpful to know the

amount of heat rejected by the ice machine when sizing

air conditioning equipment where self-contained air-

cooled ice machines are installed.

This information is also necessary when evaluating the

benefits of using water-cooled or remote condensers to

reduce air conditioning loads. The amount of heat added

to an air conditioned environment by an ice machine

using a water-cooled or remote condenser is negligible.

Knowing the amount of heat rejected is also important

when sizing a cooling tower for a water-cooled

condenser. Use the peak figure for sizing the cooling

tower.

Q Models

Self-Contained

Air-Cooled

Remote

Top/Sides 203 mm 203 mm

Back 127 mm 127 mm

There is no minimum clearance required. This value is

recommended for efficient operation and servicing only.

Caution

The ice machine must be protected if it will be

subjected to temperatures below 0° C. Failure

caused by exposure to freezing temperatures is not

covered by the warranty. See “Removal from

Service/Winterization”.

Q460/Q660/

Q1060

Stacked

Self-Contained

Air-Cooled

Stacked

Remote

Top/Sides 406 mm 127 mm

Back 127 mm 127 mm

Series

Ice Machine

Heat of Rejection

B.T.U./Hour

Air Conditioning

Because the heat of rejection varies during the ice making cycle,

the figure shown is an average.

Peak

Q460 7,000 9,600

Q660 9,000 13,900

Q1060 16,000 24,700

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Comments to this Manuals

No comments

Manitowoc QD1092N Specifications Page 13

Comments to this Manuals

Related products and manuals for Ice cube makers Manitowoc QD1092N