Manitowoc QD1092N Specifications download pdf (Page 24)

Installation Instructions Section 2

2-14 Part Number 000001759

Installation Check List

Is the Ice Machine level?

Has all of the internal packing been removed?

Have all of the electrical and water connections

been made?

Has the supply voltage been tested and checked

against the rating on the nameplate?

Is there proper clearance around the ice machine

for air circulation?

Has the ice machine been installed where

ambient temperatures will remain in the range of

1.7° - 43°C?

Has the ice machine been installed where the

incoming water temperature will remain in the

range of 0.6° - 32°C?

Is the water trough drain plug installed?

Are the ice machine and bin drains vented?

Are all electrical leads free from contact with

refrigeration lines and moving equipment?

Has the owner/operator been instructed

regarding maintenance and the use of

Manitowoc Cleaner and Sanitizer?

Has the owner/operator completed the warranty

registration card?

Has the ice machine and bin been sanitized?

Is the toggle switch set to ice? (The toggle switch

is located directly behind the front panel).

Is the ice thickness control set correctly? (Refer

to Operational Checks in Section 3 of this manual

to check/set the correct ice bridge thickness).

Additional Checks for Remote Models

Has the receiver service valve been opened

100%?

Does the remote condenser fan operate properly

after start-up?

Has the remote condenser been located where

ambient temperatures will remain in the range of

-6.6 - 49°C?

Is the line set routed properly?

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

No comments

Manitowoc QD1092N Specifications Page 24